Standard features, 1525mm high, Heavy duty tube and box section construction. Tubular vertical in fillers between rails for added strength. Slotted connecting lugs positioned near top of hurdle to help prevent trapping of legs. Suitable for field or yard use. Gates in hurdles and gates in frames can be hung from left or right. Pendulum catches prevents gate accidentally opening.

Cattle Hurdle 7ft long 6 rail.
2150mm x 1525mm high. in stock

Cattle Hurdle 8ft long 6 rail.
2440mm x 1525mm high. in stock

Cattle Hurdle 10ft long 6 rail.
3050mm x 1525mm high. in stock

Inspection Hurdle.
7ft long c/w two inspection gates.
2150mm long x 1525mm high. in stock

8ft Cattle hurdle c/w Diverter Gate
2440mm long. Diverter Gate 1050mm wide. in stock

10ft Cattle hurdle c/w Diverter Gate
3050mm long. Diverter Gate 1050mm wide. in stock

8ft Cattle hurdle c/w Access Gate
2440mm long. Access Gate 650mm wide. in stock

10ft Cattle hurdle c/w Access Gate
3050mm long. Access Gate 650mm wide. in stock

2ft 8" Wide Race Arch
815mm wide. in stock

5ft 2" Wide Race Arch
1575mm wide. in stock

2ft 8" Wide Race Arch c/w Gate
815mm wide. in stock

5ft 2" Wide Race Arch c/w Gate
1575mm wide. in stock

Coupling Bar. in stock

8ft Gate in Frame. in stock

10ft Gate In Frame in stock

Non Return Gate

Backing up bar assembly ( clamp on) in stock

Drop over catch receiver ( clamp on)

Support Post 100 x 100 1980mm long c/w 2 pairs of cattle lugs. In stock

Pair of Cattle lugs on full length drilled plate. In stock

Cattle lugs on vertical drilled plates. In Stock

• Designed for use directly behind cattle crush.
• Fully supported on rear of crush.
• Sliding gate provides a positive barrier in race.
• Hinged gates allow full & easy access to rear of animal when foot trimming.
• Clamp on latch receivers on rear of crush allow rear gate to open.
• Can be set up for right or left hand operation.
• Galvanised finish to BS EN ISO 1461

• For use with race system.
• Sliding gate provides a positive barrier in race.
• Can be set up for right or left hand operation.

• Designed to allow access to rear of crush.
• Tapered shape to allow crush rear gate to fully open.
• Side gates can hang from front or rear pillars.
• Can be used in race system to fasten following animal in race ensuring safety for operator.
• Allows access to rear of animal being held.
• Crush requires lugs for connecting to kiosk.
• Dimensions - 1040mm long x 1000mm wide x 1930mm high.

• Use of yoke handle allows infinite adjustment of neck yoke aperture between 100mm and 290mm.
• Straight yoke bars to reduce the risk of choking if animal goes down.
• Easy entry as yoke bars retract out of animals field of view.
• Operation of yoke lever moves upwards and inwards behind animals field of view.
• Front gates fully opening to allow full access to animals head.
• Right hand yoke operation. Left hand is special.
• Tread plate floor.

External Dimensions: Length 840mm, width 838mm, Height 1900mm, Base length 700mm, Internal width 738mm, Weight 202kgs.

• Unique quick adjust self closing front gate allowing easy adjustment of neck aperture giving 7 settings for yoke widths from 100mm to 250mm.
• Straight yoke bars to reduce the risk of choking if animal goes down.
• Baffle plate on yokes eliminates leg traps.
• yoke gates spring loaded to hold in present position.
• Dual handed yoke release.
• Easy to use rope head restraint.
• Drop down handle can be fitted to either gate to assist animal exit, yoke reset and allows operator to stand in safe position.
• Tread plate floor

External Dimensions: Length 510mm, width 838mm, Height 2000mm, Base length 400mm, Internal width 738mm, Weight 135kgs.

• Use of yoke adjusting handle allows infinite adjustment of neck yoke aperture from 100mm and 290mm.
• Easy entry as yoke bars retract out of animals field of view.
• Yoke bars drop below animals horns for safe entry.
• Operation of yoke lever moves upwards and inwards behind animals field of view.
• Right hand operation standard. left hand special build.
• Two piece wrap around front gates that open in a single operation, allows obstruction free access to animal's head.
• Tread plate floor.

External Dimensions: Length 1250mm, width 1300mm, Height 1900mm, Base length 840mm, Internal width 738mm, Weight 190kgs.

6 rail cattle hurdle, 7ft long x 1525mm high, complete with two inspection gates at either end of hurdle.

In Stock

Available in two lengths 8ft and 10ft, 1525mm high, Diverter gate width 1050mm.

In Stock.

Available in two lengths 8ft and 10ft, 1525mm high, Diverter gate width 650mm.

In Stock

Clamp on.

In Stock.

For use with race system, Sliding gate provides a positive barrier in race.

Can be set up for right or left hand operation.

Also available sliding gate system, designed for use directly behind cattle crush, fully supported on rear of crush, hinged gates allow full and easy access to rear of animal when foot trimming etc.

In Stock.

The above is just an example of what is available in the line of cattle handling components.

We also have non return gates, gates in frame, race arches, weigh trays, foot baths etc.